|
|
|
Saito 엔진에 대한 적용펠라를 나열한 표가 아래에 있습니다.
|
|
|
| 기본 설명 |
|
Saito Engine FA-200R3
Specs
Application: Airplane
Benchmark Prop: APC 16 x 8 @ 9000 rpm
Bore: 1.06 in (27.0mm)
Crankshaft Threads: 8 x 1.25mm
Cylinder Type: AAC
Cylinders: Radial
Displacement: 2.00 cu. in. (32.98 cc)
Engine (Only) Weight: 46.4 oz (1366 gms)
Fuel Type: Glow
Muffler Type: 10mm Flex Exhaust Pipes included
Muffler Weight: 4.4 oz (125 gms)
Prop Range: 16 x 8-10 17 x 6-8
RPM Range: 1800 - 9500
Stroke: 0.76 in (19.2mm)
Total Weight: 50.8 oz (1440 gms)
Type: 4-stroke Airplane
|
 |
 |
 |
|
|
| 상품 평가 |
|
다른 고객님들을 위하여 Saito Engine FA-200R3의 평가를 해주시겠습니까?
|
|
|
|
| You will note a
letter (A, B, C, etc.) stamped on the top of the right motor mounting lug.
This letter identifies the
production version of your engine. Should you ever need to order a part or
have a question pertaining to your engine, specify this letter
along with the engine type. This will allow ease in identifying
your engine.
Saito Single Cylinder
Prop Chart
NOTE: All recommendations are based on
engines using APC Prop, Wildcat 15% Nitro/18% ALL Synthetic Oil Fuel, and
OS Type F Glow Plug. |
| Engine |
HP |
Sport /
Aerobatic |
Scale |
Pattern |
FA-30S (H)/30SGK
2,200?2,000 RPMs |
.60 |
10x6 |
9x5, 10x6 |
9x5, 10x6 |
FA-50/50GK
2000-12,000 RPMs |
.85 |
11x7, 11x8, 12x6 |
12x5, 12x6 |
11x7, 11x8, 12x6 |
FA-56/56GK
2000-12,000 RPMs |
.93 |
11x8, 12x6, 12x7 |
12x6, 12x7 |
11x8, 12x6, 12x8 |
FA-65/65GK
2000-11,500 RPMs |
.95 |
12x6, 12x8, 13x6, 13x8 |
12x8, 13x8, 14x5, 14x6 |
11x9, 12x8, 13x6 |
FA-72/72GK
2000-11,500 RPMs |
1.2 |
12x8, 13x7, 13x8,
14x6 |
12x8, 13x7, 13x8,
14x6 |
12x8, 13x7, 13x8, 14x6 |
FA-80/80GK
2000-11,500 RPMs |
1.3 |
12x8, 13x6, 13x7, 13x8,
14x6 |
13x6, 13x7, 13x8, 14x6, 15x4 |
11x9, 11x10, 12x8, 12x9 |
FA-91S/91SGK
2000-11,000 RPMs |
1.7 |
12x10, 13x8, 13x10, 14x6,
14x7, 14x8 |
12x10, 13x8, 14x6, 14x7,
14x8, 15x6 |
11x10, 11x11, 12x9, 12x10N, 13x9 |
FA-100/FA-100GK
2000-11,000 RPMs |
1.8 |
14x8, 14x10, 15x6 |
12x11, 13x9, 14x8,
14x10, 15x6 |
12x11, 13x9, 14x8, 14x10,
15x6 |
FA-120S/120SGK
2000-10,500 RPMs |
2.2 |
14x10, 15x8, 15x10, 16x6, 16x8 |
15x8, 16x6, 16x8, 18x6 |
13.5x13.5, 14x10N, 14x12 |
FA-150/150GK
2000-10,000 RPMs |
2.5 |
15x8, 15x10, 16x8, 17x8,
17x8N, 18x6, 18x8 |
16x8, 17x8, 18x6, 18x8 |
14x10N, 14x12, 15x10, 15x11 |
FA-180/180GK
2000-10,000 RPMs |
2.8 |
15x10, 16x8, 17x8, 17x8N, 18x6,
18x8 |
16x8, 16x10, 17x8, 17x8N, 18x6,
18x8 |
14x10N, 14x14, 15x10, 15x12,
16x10, 17x8 |
|
NOTE:
Observe operating RPM ranges as excessive RPM can result in damage to the
engine.
It is recommended
that you keep ALL of the above engines below 10,000 RPMs. |
|
Home